Bộ nguồn cho hệ thống báo cháy địa chỉ Notifier AMPS-24


  • MODEL: AMPS-24
    Bảo hành: 12 Tháng
    Trạng thái: Còn hàng
    Giá : 0 đ MUA HÀNG
    Điện thoại : 0912.839.336
    Hãy gọi ngay cho chúng tôi để được tư vấn miễn phí
    Đặc điểm nổi bật:

    - Addressable by NFS-3030/NFS2-3030 FACP.
    - Selectable charging current charges 7 AH to 200 AH batteries.
    - Isolated Signaling Line Circuit (SLC) interface.
    - Trouble bus input for use with normally-open dry contacts or open-collector circuit.
    - USB Type B connector for programming installation parameters.
    - Brownout detection.

    Xem thêm »

Bộ nguồn cho hệ thống báo cháy địa chỉ Notifier AMPS-24

Features:
 
- Addressable by NFS-3030/NFS2-3030 FACP.
- Selectable charging current charges 7 AH to 200 AH batteries.
- Isolated Signaling Line Circuit (SLC) interface.
- Trouble bus input for use with normally-open dry contacts or open-collector circuit.
- USB Type B connector for programming installation parameters.
- Brownout detection.
- Battery/battery charger supervision.
- Secondary Power Auxiliary Outputs: 24V @ 0.5A and 5V @ 0.15A.
- AC loss detection and AC loss delay reporting.
- Mounts in a CAB-4 Series enclosure, EQ Cabinet Series enclosure, BB-25, BB-100, or BB-200 Battery Backbox.

Specifications: 

- Primary (AC) power:
AMPS24: 110-120 VAC 50/60 Hz input, 5 A maximum;
AMPS24E: 220-240 VAC 50/60 Hz input, 2.5 A maximum.
- MAIN 24V Output - filtered power-limited power. Refer to table for configuration/current information

etting/

Battery Size

Main 24V (TB 1 on

Main Control Unit)

Max. Current

*Total AUX 24V (TB3 on Main

Control Unit with TB2 on CPS-

24) Max. Current

1A/7-26AH Batteries

5A

3A

2A/12-60AH Batteries

5A

3A

5A/55-200AH

Configuration 1

Configuration 2

5A
3A

0A
1A

Disabled

5A

5A

- AUX 24V - provides filtered power-limited power for additional components. Refer to table above for configuration/ current information.
- Secondary power (battery) charging circuit: Current-limited, sealed lead-acid battery charger which will charge 7 to 200 AH batteries.
Selectable charging current: 1.0 A, 2.0 A or 5.0 A.
- Secondary power auxiliary outputs.
- Wire sizes: 10 AWG (5.26 mm²) to 22 AWG (0.326 mm²).
- Battery fuse (F2): 15 A, fast-acting.
- Shipping Weight: 4.25 lb